Photocatalytic oxidation of gas-phase elemental mercury by nanotitanosilicate fibers

Photocatalytic fibers were generated from the continuous evaporation of titanium tetraisopropoxide with tetraethyl orthosilicate through a flame burner. The morphology, the crystal form, and the components of the nanotitanosilicate fibers were analyzed by Raman spectroscopy, Field emission-scanning electron microscope, X-ray diffraction, and Brunauer-Emmett-Teller surface area analysis. The nanotitanosilicates prepared by three different carrier gases (air, N(2), and Ar) were tested for their photocatalytic ability to remove/oxidize gas-phase elemental mercury. Under UV black light, the Hg(0) capture efficiencies were 78%, 86%, and 85% for air, N(2), and Ar, respectively. For air, the value was close to 90%, even under household fluorescent light. The Hg(0) capture efficiency by nanotitanosilcate was measured under fluorescent light, UV black light, and sunlight.     

Diversity of crude oil-degrading bacteria and alkane hydroxylase (<Emphasis Type="Italic">alkB</Emphasis>) genes from the Qinghai-Tibet Plateau

The aim of this study was to survey the response of the microbial community to crude oil and the diversity of alkane hydroxylase (alkB) genes in soil samples from the Qinghai-Tibet Plateau (QTP). The enrichment cultures and clone libraries were used. Finally, 53 isolates and 94 alkB sequences were obtained from 10 pristine soil samples after enrichment at 10 °C with crude oil as sole carbon source. The isolates fell into the phyla Proteobacteria, Actinobacteria, and Bacteroidetes, with the dominance of Pseudomonas and Acinetobacter. The composition of degraders was different from polar habitats where Acinetobacter sp. is not a predominant responder of alkane degradative microbial communities. Phylogenetic analysis showed that the alkB genes from isolates and enrichment communities formed eight clusters and mainly related with alkB genes of Pseudomonas, Rhodococcus, and Acinetobacter. The alkB gene diversity in the QTP was lower than marine environments and polar soil samples. In particular, a total of 10 isolates exhibiting vigorous growth with crude oil could detect no crude oil degradation-related gene sequences, such as alkB, P450, almA, ndoB, and xylE genes. The Shannon-Wiener index of the alkB clone libraries from the QTP ranged from 1.00 to 2.24 which is similar with polar pristine soil samples but lower than that of contaminated soils. These results indicated that the Pseudomonas, Acinetobacter, and Rhodococcus genera are the candidate for in situ bioremediation, and the environment of QTP may be still relatively uncontaminated by crude oil.     

"十二五"期间辽河流域的典型流域土地利用组成和变化分析研究

在遥感影像数据基础上,采用ERDAS和ArcGIS分析得出"十二五"期间清河、凡河和蒲河3个流域的土地利用组成及变化.结果表明:清河流域和凡河流域土地利用以林地为主,自然类型面积之和占流域总面积比例超过50%,蒲河流域则以耕地和建设用地等人工类型为主,面积之和占比超过80%;"十二五"期间各流域的土地利用类型均存在不同程度自然类型向人工类型转化的现象,清河流域变化最大,蒲河最小.     

水专项"十三五"时期辽河流域水环境管理研究思路初探

以水专项在辽河流域实施的阶段性成果及辽河流域水环境管理现状为基础,分析"十三五"时期辽河流域水环境管理的需求,提出构建成套流域水环境管理技术体系和管理大平台、全面建设并优化水生态环境监测网络、实行水环境管理的动态调节机制和建立健全流域水环境管理长效机制的水环境管理研究思路,并指出研究应密切结合地方管理,充分发挥地方环境管理的责任主体地位,为水专项第三阶段"综合调控"战略目标的实现提供有力支撑.     

江西西华山钨矿床流体包裹体特征及成矿流体来源

本文对江西西华山钨矿床的石英流体包裹体进行了岩相学和显微测温分析,研究了石英流体包裹体的气、液相组分及碳、氢、氧同位素特征。结果表明,石英中流体包裹体十分发育,包裹体类型有NaCl-H2O(盐水)包裹体(Ⅰ)和CO2-H2O包裹体(Ⅱ),且以前者为主。包裹体均一温度在200℃～280℃,平均249.5℃;盐度为7.89%～13.95%,平均10.73%;成矿流体密度为0.628g/cm3～0.895g/cm3,平均0.795g/cm3,属低盐度低密度范畴;压力平均值为64.01MPa,对应的成矿深度平均值为6.45km。成矿热液气相成分以H2O为主,CO2含量低;液相成分阴阳离子浓度都很低,相对富钠和氯,流体离子类型大致呈Na+-K+-Cl--SO42-型。成矿流体基本来自岩浆水,部分可能有变质水的加入;流体中碳主要由岩浆水提供,少数由地幔源提供。     

黄河入河沙漠颗粒物对磷酸盐的吸附特征

研究了黄河入河沙漠颗粒物在天然水(河水和海水)中对磷酸盐的吸附行为,用改进的Langmuir和Freundlich等温吸附模型对实验数据进行了拟合.结果表明,①改进的Langmuir等温吸附模型更适用于描述黄河入河沙漠颗粒物对磷酸盐的吸附特征,其物理意义更明确,得到的拟合参数更合理;②颗粒物对磷的最大吸附容量Qmax变化范围为41.322～357.143mg.kg-1,其中居延海颗粒物Y2的Qmax最大.Qmax与颗粒物(Y1～Y5)的有机质有着极显著的正相关关系;③除巴丹吉林沙漠颗粒物Y1外,颗粒物的临界磷平衡浓度EPC0值均大于其相应水体的磷浓度.Y1在黄河水中吸附磷的EPC0小于相应水体的磷浓度0.0100.053 mg.L-1,而在渤海海水中却大于相应水体的磷浓度0.1090.074 mg.L-1,表明Y1吸附了黄河水中的磷,进入渤海后Y1原有吸附可交换态磷NAP转移到海水中.其它颗粒物与相应水体进行磷交换的过程中存在着解吸磷的现象,具有向相应水体释放磷的能力;④黄河入河沙漠颗粒物对磷酸盐的吸附等温线是过溶液浓度轴0.00的交叉型等温线,这种新型交叉型吸附-解吸模型较好地解释了其吸附特征和天然粒子的双重性作用.     

内循环三相生物流化床处理生活污水的试验研究

对内循环三相生物流化床处理生活污水进行了试验研究,探讨了生物膜的形成和水力停留时间及曝气量对处理效果的影响。结果表明：在HRT为6h,曝气量为0.6m3/h,进水COD和NH4＋-N分别为240.2~298.7mg/L和29.1~68.9mg/L条件下,平均COD去除率为83%,NH4＋-N去除率为95.1%。     

Municipal solid waste source-separated collection in China: A comparative analysis

A pilot program focusing on municipal solid waste (MSW) source-separated collection was launched in eight major cities throughout China in 2000. Detailed investigations were carried out and a comprehensive system was constructed to evaluate the effects of the eight-year implementation in those cities. This paper provides an overview of different methods of collection, transportation, and treatment of MSW in the eight cities; as well as making a comparative analysis of MSW source-separated collection in China. Information about the quantity and composition of MSW shows that the characteristics of MSW are similar, which are low calorific value, high moisture content and high proportion of organisms. Differences which exist among the eight cities in municipal solid waste management (MSWM) are presented in this paper. Only Beijing and Shanghai demonstrated a relatively effective result in the implementation of MSW source-separated collection. While the six remaining cities result in poor performance. Considering the current status of MSWM, source-separated collection should be a key priority. Thus, a wider range of cities should participate in this program instead of merely the eight pilot cities. It is evident that an integrated MSWM system is urgently needed. Kitchen waste and recyclables are encouraged to be separated at the source. Stakeholders involved play an important role in MSWM, thus their responsibilities should be clearly identified. Improvement in legislation, coordination mechanisms and public education are problematic issues that need to be addressed.     

尿中氚水和总氚的对比分析测定研究

用蒸馏液闪法测量尿中氚水浓度 ,用氧化蒸馏液闪法测量尿中总氚 (氚水和有机氚 )浓度。同时测量了 1999年核设施退役时接触氚人员的高于本底水平的尿中氚水和总氚浓度 72个样品。比较氚水和有机氚浓度 ,得到有机氚浓度占氚水浓度的平均值为 (5 4± 3 7) % ,其值与理论值和动物实验值基本相符     

PSO和SVM混合算法确定太湖入湖河流水质主要影响因子

以影响太湖入湖河流水质的24个因子值为研究对象，将PSO算法与SVM算法相结合。PSO算法用于优化SVM算法的参数c和g，以利于快速、高效地确定c和g的全局最优值；SVM算法基于最优的c和g，分别以24，21，18，15，12，9和6个因子作为特征向量预测水质的污染程度。结果表明，当特征向量为9个影响因子时预测率最高。其参数c=18.56，g=1.35，对应的预测率为：全局预测率92.59%，重度污染水质预测率88.89%，轻度污染水质预测率94.45%。因此，通过PSO和SVM混合算法，可以确定影响太湖入湖河流水质的主要因子，利用这些主要因子对水质进行预测预警，不但可以节省时间，而且可以得到精确的结果。